close
In the IMl system technology process, for an IMD product, it is necessary to have a comprehensive and coordinated technical responsibility to comprehensively plan each process and each docking process of the IMD product. Otherwise, it is difficult to realize the electrical panel that finally conforms to the original design. Product's.
First of all, let us know that PET materials must be selected to have certain toughness and good plasticity. Most of the PETs produced in Taiwan, or PET films in Japan, have a thickness of 0.125mm and an error of no more than 5%. Technical reference range.
Ink, high temperature resistance is the preferred item, followed by its ink color formulation.
The degree of environmental purification is: 300,000, 100,000, and the temperature is 22-24 °C. Because there is a drying process in the silk screen printing process, and it is a continuous operation mode; the temperature of the tunnel furnace has a great influence on the humidity of the environment, generally it should be kept in the 80% humidity range. When the humidity is not enough, the humidification process should be performed to give Satisfy.
In the process of purifying injection molding, the conveying process of ABS pellets is as close as possible to the closed circulation conveying system to reduce the dust rising during the conveying process or to cause dust to enter the inner surface of the mold.
The operator's overalls should be anti-static, wear finger cots, and the place where cleaning is required must be done with non-woven fabric and alcohol;
The transfer of the two-phase controlled transfer box avoids damage to the cleaned air environment before each process and during material transfer;
In order to realize the processing of large electrical panel, in addition to the injection molding machine to meet the installation of large molds or the molding of large objects, we must not forget to install 3-5 tons of lifting equipment or driving equipment in the purification environment.
First of all, let us know that PET materials must be selected to have certain toughness and good plasticity. Most of the PETs produced in Taiwan, or PET films in Japan, have a thickness of 0.125mm and an error of no more than 5%. Technical reference range.
Ink, high temperature resistance is the preferred item, followed by its ink color formulation.
The degree of environmental purification is: 300,000, 100,000, and the temperature is 22-24 °C. Because there is a drying process in the silk screen printing process, and it is a continuous operation mode; the temperature of the tunnel furnace has a great influence on the humidity of the environment, generally it should be kept in the 80% humidity range. When the humidity is not enough, the humidification process should be performed to give Satisfy.
In the process of purifying injection molding, the conveying process of ABS pellets is as close as possible to the closed circulation conveying system to reduce the dust rising during the conveying process or to cause dust to enter the inner surface of the mold.
The operator's overalls should be anti-static, wear finger cots, and the place where cleaning is required must be done with non-woven fabric and alcohol;
The transfer of the two-phase controlled transfer box avoids damage to the cleaned air environment before each process and during material transfer;
In order to realize the processing of large electrical panel, in addition to the injection molding machine to meet the installation of large molds or the molding of large objects, we must not forget to install 3-5 tons of lifting equipment or driving equipment in the purification environment.
全站熱搜
留言列表
